top of page
ELECTRIC ACTUATED VALVE

The Hydrocore Electric Actuated Valve is the only globe valve that breaks away from the standard globe valve and works in an entirely different way. Instead of applying a force on a plug (disc) to regulate the flow, the Hydrocore valve uses a hydrostatically balanced shuttle to regulate the flow. Our balanced valve, requires very low operating forces to actuate.  Therefore, no gearbox is required to assist in the valve's opening or closing. The absence of a gearbox to operate the valve eliminates the risk of malfunctioning and offers a far longer lifetime over traditional valves such as ball valves that rely on gearboxes to operate.

 

The Hydrocore valve's flow coefficient (Cv/Kv) is by far superior due to its design to the standard globe valve, thus saving tremendously on the electrical costs to operate, making it the perfect Pump Discharge Valve in the field.

HCA ELECTRICALLY ACTUATED VALVE.png
HCA ELECTRICALLY ACTUATED VALVE.png
FEATURES
  • Does not need a gearbox to operate

  • Superior flow coefficient (Cv/Kv)

  • Throttles and maintains the pump pressure when the downstream column is empty or partially full

  • Throttles the pump outlet when the pump is stopped to prevent water hammer

  • Can be maintained in line

  • High cavitation resistance due to design

  • Stainless steel moving internals parts

  • Cast steel body 

  • Low pressure drop across valve

  • Flanges and face-to-face dimensions to customer specification

  • Closes to pre-open position if the electrical signal is lost

  • Manual override on actuator

  • Electric specifications to suit customer specifications

SPECIFICATIONS
FLOW COEFFICIENTS & FLOW RATES

Actuator

To suit customer specification

​

Pressure rating

160 bar (max) working pressure

​

Temperature rating

Up to 85ºC with standard seals.

​

Media

Liquid and gas with low content of suspended solids.

​

Pipe sizes

2” (50 NB) to 16” (400 NB)

​

Flanges

SABS 1123, BS4504, BS10, ASME B16.34, ANSI B16.5

​

pH levels & chlorides

Parts of the valve are made from stainless steel and can withstand a low level of chlorides.

​

Installation position

The valve can be installed in any position

 

Seating

Seat Leakage - B16.104 class III, IV, V or VI, depends on valve type and application.

50 NB

Cv: 50 | Flow (max): 9 â„“/sec 

​​

80 NB

Cv: 97 | Flow (max): 25 â„“/sec

​​

100 NB

Cv: 132 | Flow (max): 38 â„“/sec

​

150 NB

Cv: 525 | Flow (max): 117 â„“/sec | ΔP: 12.5 psi

​​

200 NB

Cv: 1086 | Flow (max): 152 â„“/sec | ΔP: 1.4 psi

​​

250 NB

Cv: 1433 | Flow (max): 233 â„“/sec | ΔP: 6.7 psi

​​

300 NB

Cv: 1936 | Flow (max): 337 â„“/sec | ΔP: 7.9 psi

DIMENSIONS AND WEIGHTS
Specifications - HCA ELC.png

SIZE

​

50 NB

​

80 NB

​

100 NB

​

150 NB

​

200 NB

​

250 NB

​

300 NB

A (mm)

​

121

​

173

​

202

​

381

​

494

​

573

​

652

B (mm)

​

480

​

530

​

540

​

381

​

494

​

573

​

652

C (mm)

​

 

 

 

 

 

 

1363

​

1590

​

1753

​

1885

#150 F-T-F

​

203mm / 16kg

​

267mm / 23kg

​

292mm / 31kg

​

559mm / 229kg

​

660mm / 405kg

​

787mm / 744kg

​

838mm / 1052kg

Specifications - HCS ELC.png

#300 F-T-F

 

267mm / 18kg

​

318mm / 28kg

​

356mm / 41kg

​

59mm / 245kg

​

660mm / 429kg

​

787mm / 778kg

​

838mm / 1098kg

#600 F-T-F

 

292mm / 19kg

​

356mm / 31kg

​

432mm / 53kg

​

559mm / 270kg

​

660mm / 460kg

​

787mm / 840kg

​

838mm / 1164kg

#900 F-T-F

​

368mm / 33kg

​

381mm / 41kg

​

457mm / 64kg

​

610mm / 297kg

​

737mm / 509kg

​

838mm / 891kg

​

965mm / 1277kg

#1500 F-T-F

​

368mm / TBD

​

470mm / TBD

​

546mm / 106kg

​

705mm / 345kg

​

832mm / 585kg

​

991mm / 1051kg

​

1130mm / 1533kg

bottom of page